The daily printing of the inkjet printer, when the ink is used in winter, the viscosity of the ink will increase after the temperature is reduced, which will make its fluidity worse, which will affect the normal printing of the inkjet printer. Here we remind all piezoelectric inkjet printer users to pay attention Use of ink in low temperature environment in winter.
In winter, the general temperature in the north and south regions has different procedures to drop, even in the low temperature and severe cold, the physical and chemical parameters of the ink will also change and be affected by this when the temperature drops. For example, after the temperature is lowered, the viscosity of the ink will increase and its fluidity will become worse, which will affect the normal ink ejection of the head during printing, such as horizontal lines (white channels) on the print screen or frequent ink breaks during printing. It will also cause fatigue damage to the internal structure of the head and so on.
一(yī): Purchase and use original ink
Ink is one of the main consumables of the photo machine. The purchase and stocking of ink are very important to avoid unexpected needs! First of all, when choosing inks, you should choose inks that are suitable for winter use. It is recommended to buy original inks for inkjet printer , and refuse to use low-quality and unknown brand inks. Don’t buy low-quality inks for cheap. If you don’t use the original ink of the inkjet printer, you will not be able to enjoy the warranty service of the inkjet printer, but you can also get the correct color reproduction for printing! Therefore, it is recommended to buy high-quality original ink!
二: the correct storage of ink
Ink storage should pay attention to heat preservation, especially in severe cold areas in the north. If the storage space does not have the moisturizing conditions, it is recommended to install heating or air conditioning. It is best to keep the storage environment temperature 15-30 ℃ and air humidity 25-70% to ensure ink Store normally.
三: The working environment of the inkjet printer should maintain a normal room temperature》
The working environment of the printer is to keep the temperature and humidity in the printing room at 18-27 degrees Celsius, and the relative humidity is within the ideal range of 35%-80%. At the same time, it is recommended to ground the power supply of the printer. Especially in cold and low temperature areas in the north, air conditioning or heating can be used to increase the ambient temperature of the printer. If the printer is prone to disconnection and ink flying due to lower ambient temperature and increased ink viscosity, you can try to increase the nozzle voltage and gradually try to obtain a better print by using +0.2V nozzle voltage each time. Effect, please pay attention to the upper limit of the print head voltage, and control the print head drive voltage within the highest limit. If you are not sure about the voltage safety limit of the print head, please consult the relevant technical personnel for detailed operation and solutions, or use other related methods to solve the inkjet printing effect of the printer in the winter low temperature climate environment.
