How to solve the color problem of UV printer? The UV printer market is becoming more and more popular, and more people are buying, so the feedback problems are various. Today, the uv printer manufacturer and you will introduce the common problems, what should be done if the uv printer has color deviation during the operation process.
The main factors affecting this operation are determined by four factors: toning, ink, software, and temperature.
1. Toning problem of uv flatbed printer
Solution: Restore to the color curve value set at the factory. If not, you can contact the manufacturer's technician to modify it remotely. If it is a new type of uv ink, the color curve needs to be recreated.
2. Ink problem of uv flatbed printer
Solution: Different types of uv ink have different color saturation, brightness, color gamut, etc. After replacing the new uv ink, it will inevitably lead to pattern printing color problems, and the color curve needs to be recreated. Secondly, the ink dots are different. To print a test chart, you need to observe the state of the nozzle hole. If the ink is blocked, the nozzle needs to be cleaned. Finally, the ink sedimentation problem, the uv ink that has not been used for a long time, the internal pigment will have a sedimentation problem, and it needs to be fully stirred before use. If it condenses or becomes sticky, it means that the UV ink has expired and needs to be replaced.
3. Software failure of uv flatbed printer
Solution: Reinstall the software of the uv flatbed printer. If the value is wrong, you need to restore it again. Note that before reinstalling, you need to antivirus the computer and add the uv flatbed printer software to the whitelist of the antivirus software.
4. The uv flatbed printer is affected by temperature
Solution: The outside temperature is between 15℃-30℃, which is a good factory temperature for uv flatbed printers. If the temperature is too low, you need to install an air conditioner, if the temperature is too high, you need to cool down.
The above is the solution compiled by our uv printer manufacturer. Of course, when there is a problem, it is best to report to the manufacturer as soon as possible to find a solution to avoid greater damage to the machine due to incorrect operation.
