As a large-scale color inkjet printer, it adopts the main body printing platform and rack-supported design scheme in the model design. The printing of the Eco solvent printer is powered by the related drive servo motor, which drives the print head carriage to run back and forth on the printing platform, and the stepping motor controls the related printing and paper feeding system. During the printing process of the eco solvent printer, the operation of the motor provides the driving power for the eco solvent printer, which is also the root point of the noise generated by the eco solvent printer during operation.
If the piezoelectric eco solvent printer has a lot of noise when it is running, it can usually be checked and solved by the following aspects.
1: Whether the rack installation of the eco solvent printer and each connection structure are fixed with screws, so in the process of installing the new machine rack of the eco solvent printer , you must pay attention to the installation of the rack at every connection point. Screws should be fixed and tightened;
2: Check whether the related motors of the eco solvent printer are operating normally?
3: Whether the screw of the motor and the main body is loose and not fixed;
4: Whether the tightness between the motor and the pulley is too loose or too tight, you can observe and adjust the tightness appropriately;
5: The smoothness of the guide rail of the trolley frame of the eco solvent printer. If the guide rail is not flat, there will be noise when the trolley is running, and the trolley will shake.
6: The flexibility of the ink chain of the eco solvent printer, whether there are debris, shredded paper, etc., is also one of the reasons for the ink chain to generate noise during the printing process of the eco solevnt printer.
